Jumping Cow Weathervane - Handmade in USA
Have weathervane and cupola questions or would like to just order over the phone. us a call at 207-843-0440. Customer Service Hours are Monday-Friday 8:AM - 4:00 PM Eastern Time. Order your weathervanes and cupolas today.
Our Jumping Cow Weathervane over a Fence purchase includes the figure, copper spacer balls, the directionals, rod and ring. The weathervane figure is made in the USA from 16 ounce copper, each piece is hammered and bent to form a unique piece of masterful Jumping Cow Weathervane over a Fence art that will last for years to come.
Weathervane approximate figure dimensions: 24"L X 13"H
Add approx. 10" to dimension height for directionals and spacer balls
Directional Dimensions: 18"L with 3" Lettering
Weathervane Options: natural or patina copper // standard or scrolled directionals
Please note: cupolas and weathervane mounts are sold separate.
Our weathervanes fit all mounts and cupolas offered on our site.
Our Jumping Cow Weathervane over a Fence comes ready to fit any of our cupolas we sell. To mount the weathervane into one of our cupolas all you have to do it put the solid ¾”weathervane rod down through the top of the cupola and through an internal crossmember inside the roof of the cupola. Use a little caulking around the hole to seal the rod and cupola together.
Our larger cupolas have a clamp under the crossmember so that it can lock the rod in place under the cross member. If you are not using a cupola with our weathervane then please check out our many types of brackets, stands and mounts on our mounts page. If an extended rod is needed to add more height or depth, please use a red thread locker such as Loctite or other brand.
Weathervane Figure - Made in the USA.
Our Jumping Cow Weathervane over a Fence is made here in Eddington, Maine by hand hammering it into a form using 16 oz copper/ 24 gauge. Our weathervane is real copper and will turn brown, black and then a green patina over time. If you choose to keep the weathervane shiny, you can always apply a clear coat of exterior poly urethane over the weathervane figure and weathervane parts to keep it from changing. Our main Weathervane Retail Shop is located in Trenton, Maine on route 3 headed towards Bar Harbor and Acadia National Park.
Special Note about our Handmade Weathervanes:
Each of our handmade weathervanes are Made to Order. Each weathervane is hand hammered into a mold that we have produced with our own weathervane artwork. The weathervane is cut out of the copper sheet and then soldered together. Final touches for making the weathervane include cutting, sanding, and putting a weathervane tube into the weathervane figure and to make a balanced turning point. We are proud to say that all our staff to include our retail folks have designed at least one weathervane or more since becoming part of our amazing family-based company.
