Three Crosses Weathervane - Handmade in USA
Have Cupola and Weathervane questions or would like to just order over the phone. Give Mark or Shannon a call at 207-843-0440. Our Weathervane Shop Hours are Monday-Friday 8:AM - 4:00 PM Eastern Time. Call now for your new weathervane and cupola.
Our Three Crosses Weathervane purchase includes the copper figure, copper spacer balls, the directionals, rod and ring and a choice of mount. The weathervane figure is made in the USA from 16 ounce copper, each piece is hammered and bent to form a unique piece of masterful copper Three Crosses Weathervane art that will last for years to come.
- Weathervane Approximate Figure Dimensions: 18"L X 10"H
- Add approx. 5" to dimension height for directionals and spacer balls
- Directional Dimensions: 12"L with 2" lettering
- Weathervane Options: natural or patina copper // standard directionals
- Mount included with this purchase. Choose from a roof or eave mount when ordering.
Please note: shed cupolas are sold separate.
This shed sized Three Crosses Weathervane is a perfect fit for one of our smaller shed cupolas from sizes 16” – 22” Cupola. This shed weathervane will work with the larger cupolas.
Weathervane Figure - Made in the USA.
For Patina Copper -- Patina acid is applied via spray/brush to accelerate the aging process. Applied patina look will vary on each weathervane.
Our Three Crosses Weathervane is made here in Eddington, Maine by hand hammering it into a form using 16oz copper/ 24 gauge. This weathervane is real copper and will turn brown, black and then to a green patina over time. If you choose to keep the weathervane shiny, you can always apply a clear coat of exterior poly urethane over the weathervane figure and parts to keep it from changing. Our main Weathervane Retail Shop is located in Trenton, Maine on Route 3 headed towards Bar Harbor and Acadia National Park. Made in Maine.
Special Note about our Handmade Weathervanes:
Each of our handmade weathervanes are Made to Order. Each weathervane is hand hammered into a mold that we have produced with our own weathervane artwork. The weathervane is cut out of the copper sheet and then soldered together. Final touches for making the weathervane include cutting, sanding, and putting a weathervane tube into the weathervane figure and to make a balanced turning point. We are proud to say that all our staff to include our retail folks have designed at least one weathervane or more since becoming part of our amazing family-based company.