Bancroft Cupola - PVC Octagon Window Cupola

Introducing the Bancroft Maintenance Free PVC Cupola, a true testament to American craftsmanship and quality. This octagon cupola with a bell roof style is designed to add a touch of elegance and charm to any structure it graces. The double strength windows allow natural light to filter through, creating an enchanting ambiance within sheds, garages, and barns. Available in your choice of copper or metal color roof, this exquisite cupola comes in three classic PVC colors: white, sand, or clay - ensuring seamless integration with any architectural scheme.

Cupola Product Information

Product Information: PVC Cupola or Wood Cupola made from Red Cedar

Made with Double Strength Single Pane Glass and Easy Access Panel for Light Changes

Cupola available sizes - 24", 30", 36", 42" 49", 60", 72" // Roof used for measurements, ( Window Cupolas are not designed for Skylights)

Board Size: 3/4" Material is PVC ( Brand Name Palight) Board Size: 3/4" Wood Red Cedar

Cupola Color Metal Roofing: Made by Galvalume, Galvalume is 55% Aluminum -45% Zinc coated Sheet product that is ideally suited for most types of roofing. The metal sheet is heat-formed to prevent microscopic cracking and the rust preventing paint coating as the panel is formed. This makes for a long lasting finish.

Note: Cupola Metal Roof Colors as as close as possible to actual colors: color shown may vary slightly from actual metal.

This cupola is available in maintenance-free vinyl and is weathervane ready with a 3/4 inch rod opening. Designed for up to a 8/12 pitch. Cupola roof is covered with standing seam copper or metal roofing is available.

Cupola Roof used for measurements, Octagon Cupolas are measured from the largest part of the cupola roof which is the  flat to flat on this style of cupola. 

Cupola Dimensions: (approx)

24" Cupola Dimensions - 24" Roof - 43" High

30" Cupola Dimensions - 30" Roof - 52" High

36" Cupola Dimensions - 36" Roof - 60" High

42" Cupola Dimensions - 42" Roof - 67" High

48" Cupola Dimensions - 48" Roof - 75" High

60" Cupola Dimensions - 60" Roof - 89" High

72" Cupola Dimensions - 72" Roof - 104" High

Special Note:  All cupolas are made to order. Cupolas are constructed in a 3 section design for ease of handing and installation

Weathervanes sold separately.

• Cupola Base Extensions are for 9/12 up to 12/12 pitched roof lines.
• The cupola comes weathervane ready with a 3/4" opening. Roof mounts are not needed if using a cupola.
• Customers can request the weathervane opening be capped. For using the cupola without a weathervane.
• The louver cupolas can be used for venting, be sure and have your carpenter flash around base to keep the water and moisture out. Window cupolas are not used for venting.
• If not used for venting, the cupola can go right over the shingles.
• It is the customer’s responsibility to cut the roof pitch into the cupola base to ensure proper fit.
• The Cupola is made from Palight PVC or Red Cedar, Wood.
• Painting PVC Cupolas - Our PVC Cupolas can be painted but you need to use an acrylic latex paint that has a light reflective value of at least 55 or greater. Black and other dark paint colors can cause the PVC to warp. When painting your new cupola always check with your local paint shop to get the best paint possible. Any use of dark paints will void our warranty on the cupola, bird feeders and other PVC products.